Installing Creative Audio Tools CD In Windows 95

• For DOS/Windows 3.x users who own the new version of Creative Audio CD. There are two ways of installing Creative software in Windows 95:
  • Method 1 - Install software in Windows 95
    • Upgrade Windows 3.x to Windows 95
    • Launch Windows 95 and insert the Creative Audio CD into your CDROM drive.
    • An installation menu will be displayed on the screen.
    • Click INSTALL from the installation menu and follow through the installation instructions on the screen.
  • Method 2 - Install software in DOS/Windows 3.x before upgrading to Windows 95
    • At the DOS prompt, change to the drive containing your CD-ROM, for example, type D:.
    • Change to the WIN31 directory, for example, type CD WIN31.
    • Type INSTALL and press <Enter>.
    • Follow through the installation instruction on the screen.
    • Continue "Method 1 - Install software in Windows 95".
• For Creative users who have the earlier version of Creative's software, (i.e. software developed to support only DOS/Windows 3.x but not Windows 95) and are upgrading to Windows 95:
  • Do not install the Creative software (i.e. do not run INSTALL) from DOS session after upgraded to Windows 95.
  • If you have done the above step, the sound drivers for Windows 95 will be overwritten. This fails to support sound properly in Windows 95. Please perform the following steps:
    • remove the sound card device from the Device Manager
    • select Add New Hardware from Control Panel
    • allow Windows 95 to scan and detect the sound card and re-install the necessary drivers for Windows 95.