Video Blaster FS200

CT6050

Video Blaster FS200 (Full Screen) is an all-in-one capture, compression and playback card which provides full motion video control. VB FS200 has the capability to scale up the original size of the sequences and playback full-screen. It can position and scale the video image onto the output display and allows the video image to be merged with computer graphics for interactive multimedia applicaiton. VB FS200 supports both NTSC and PAL system. VB FS200 has to work with standard VGA card that incorporates a feature connector. It accepts 1 composite video and 1 S-Video source.

• General
• Hardware Specifications
• Hardware Settings
• External Connectors

GENERAL

• System Requirements:
  • IBM PC 386 SX25 and above
  • 4MB system memory
  • 2MB hard drive space, minimum
  • 16-bit ISA expansion slot
  • MS DOS 3.1 or PC DOS version 5.0 and above
  • VGA card with standard VESA compliant feature connector
  • Windows 3.1 or higher installed
  • MS Video For Windows 1.0 and above

HARDWARE SPECIFICATIONS

• Supply Voltage Requirement (Loading): +5, +12, -12 Volt
• Current Consumption (Typical.): 1, 0.28, 0.104 A respectively
• Clocks Frequency: 50 MHz and 26.8 MHz
• Video Signal Input Level:
  • Composite video signal: 1.0 Vpp @ 75-Ohm load
  • S-Video signal: 1.0 Vpp (nominal)
• Video Signal Output Level: RGB 0.6 Vp-p (typical)

HARDWARE SETTINGS

Default settings shown in [brackets]

• Interrupt (IRQ): 5, 6, 7, [10], 11, 12, 14, 15
• I/O Address: 680, 6A0, 6C0, [6D4], 71C, 720, 740, 760, 780, 7A0, 7C0, 7E0 Hex

Address  680  6A0  6C0  6D4  71C  720  740  760  780  7A0  7C0  7E0
JP3: 1   Off  Off  Off  Off  Off  Off  Off  Off  Off  Off  Off  Off  
     2   On   On   On   On   Off  Off  Off  Off  Off  Off  Off  Off  
     3   Off  Off  Off  Off  On   On   On   On   Off  Off  Off  Off  
     4   On   On   Off  Off  On   On   Off  Off  On   On   Off  Off  
     5   On   Off  On   On   On   Off  On   Off  On   Off  On   Off  
     6   On   On   On   Off  Off  On   On   On   On   On   On   On   
     7   On   On   On   On   Off  On   On   On   On   On   On   On   
     8   On   On   On   Off  Off  On   On   On   On   On   On   On

• Frame Buffer Base Address (s/w programmable):
  • I/O Mapped: 1-16 MB
  • Memory Mapped: 9-15 MB
  • Expanded Memory: B000, B400, D000, D400, D800, DC00

EXTERNAL CONNECTORS

• VGA/Video In Connector - 15 pin D-shell female connector
• Monitor Out Connector - 15 pin D-shell female connector
• S-Video In Connector - 4 pin S-connector
• VGA Feature Connector - 26 way double row straight header