PCI IDE Device Driver Version 3.01.1,  Date 11/16/2000

Copyright (c) 1999-2005 of VIA Technologies, Inc.

VIA Bus master (Ultra DMA) PCI IDE Driver Read Me

for Win9x/WinNT/Win2000/Millennium 

This ReadMe file provide the information of driver installation,

Enable/Disable DMA Feature and Uninstall "VIA Bus Master PCI IDE Driver". 

CONTENTS:

·         System_Requirements

·         Support_Features

·         Distribution Package Content

·         Driver Identification

·         Package_Version_Identify

·         Silent_Install_Driver

·         Verifying_Installation_of_the_Driver

·         Release History

System Requirements

·         This package should be installed on the VIA Bus Master IDE chipset,VT82C580VP or later, and others' chipset will not be supported.

·         The "VIA Bus Master PCI IDE Driver" supports the following Operation System.

·         Operation System Version

Operation System

Version Requirement

Windows 95

4.00.950 or above

Windows 98/SE

4.10.1998 or above

Windows NT

 3.51 or 4.0

Windows 2000 

2195 or above

Millennium

4.90.3000 or above

　Back to Top

Support Features

·         Supported drive includes:
- ATA fixed disk
- ATAPI CD-ROM devices
- ATAPI Tape Drives
- ATAPI CD-ROM Changer Drives
- ATAPI DVD-ROM Drives
- ATAPI  CD R/W Drives
- ATA/ATAPI LS-120, ZIP, Cartridge and Removable Media Drives

·         Support transfer mode:
- PIO Mode 0/1/2/3/4
- Single Word DMA 0/1/2
- Multiword DMA 0/1/2
- Ultra DMA Mode 0/1/2/3/4/5

·         Compatible with enhanced CD application:
- Video CD
- Music CD
- DVD
- Multi-CD changer
- CD recorder

·         ACPI Power Management Support:

- Win9x Driver only support stand by mode with miniport driver limitation issue.

- Win9xVSD driver support both Hibernate and stand by mode.

-         Win2Kdriver support both Hibernate and stand by mode.

Back to Top

Distribution Package Contents

This distribution floppy is compress by auto uncompressing format. You
could uncompress it by execute it.

The floppy by uncompressing includes these files are listed below.

FLOPPY 

Setup Files

　

　

Driver Files

　

_INST32I EX_

296,674

　

\IDETool

　

_ISDEL EXE

 8,704

　

PCIENUM SYS 

281,676

_SETUP DLL

11,264

　

IDETOOL INI

2,131

_SYS1 CAB

175,466

　

IDETOOL EXE

339,968

_SYS1 HDR

3,905

　

\WIN2K

　

_USER1 CAB

 94,011

　

VIAIDE2K INF

2,867

_USER1 HDR

 4,681

　

VIADSK SYS 

49,164

DATA TAG

136

　

VIAIDE2K DLL

32,768

DATA1 CAB

469

　

\WIN9X

　

DATA1 HDR

2,707

　

VIADSK MPD

 59,965

LANG DAT 

23,541

　

VIAIDE INF

2,063

LAYOUT BIN

 609

　

VIAIDE VXD

10,260

SETUP ISS

311

　

\WIN9XVSD

　

README TXT

8,833

　

VATAPI VXD

8,793

OS DAT 

450

　

VIAVSD INF

1,471

SETUP BMP

375,478

　

\WINMEVSD

　

SETUP EXE

61,440

　

VATAPI VXD

8,793

SETUP INI 

102

　

VIAVSD INF 

1,471

SETUP INS

97,346

　

\WINNT

　

SETUP LID

49

　

VIADSK SYS

49,248

　

　

　

VIAIDE INF 

22,410

 

Back to Top

Driver Installation/Identification

·         Windows 9x/ME VSD Driver

　

§         Driver Installation

Click the SETUP.EXE program and select "Install" button then it will
install the "VIA Bus Master PCI IDE VSD Driver" automatically on your 
Windows 9x system. It will copy the VSD driver to the \WINDOWS\SYSTEM\IOSUBSYS. 
It only combines with windows default IDE driver for some compatible issues.

§         Driver Un-installation
You could remove the "VIA Bus Master PCI IDE VSD Driver" by selecting the
"Uninstall" button. It will completely remove the driver from the system.

　

·         Windows 9x/Millennium Driver

　

§         Driver Installation 

Click the SETUP.EXE program and select "Install" button then it will
install the "VIA IDE Bus Master Driver" automatically on your Windows 9x
system. It will copy the driver to the \WINDOWS\SYSTEM\IOSUBSYS and set
the related registry tree.

§         Enable/Disable DMA 

The default setting is the DMA mode. You could turn off the DMA setting
by running the VIA IDETool.

§         Driver Un-installation

You could remove the "VIA Bus Master PCI IDE Driver" by selecting the
"Uninstall" button. It will completely remove the driver from the system.

·         Windows NT/Windows 2000 Driver

　

§         Driver Installation

Click the SETUP.EXE program and select "Install" button then it will
install the "VIA IDE Bus Master Driver" automatically on your Windows NT
system. It will copy the driver to the \WINNT\SYSTEM32\DRIVERS and set
the related registry tree.

§         Enable/Disable DMA

The default setting is the DMA mode. You could turn off the DMA setting
by running the VIA IDETool.

§         Driver Un-installation

You could remove the "VIA Bus Master PCI IDE Driver" by selecting the
"Uninstall" button. It will completely remove the driver from the system.

Back to Top

Package Version Identify

You could check this distribution version and release date by using
the DATE\TIME displayed by using dir/p command. 

e.g :    SETUP EXE 59,392 mm-dd-yy hh:mi

The version number reads as 3.mi.hh, which was released on the date of mm/dd/yy.

Back to Top

Silent Install Driver

Support silent mode install:
Available parameters: -b, -u, -vsd, -s

Parameter Description

-b Causes Setup.exe automatically to reboot after
the silent mode install successfully.

-u Uninstall driver. This parameter must works with
the '-s' parameter.

-vsd Install Win9xVSD driver on your Win9x System. If you 
don't assign the parameter, the setup will install MPD 
driver automatically. The parameter will be invalid on 
NT system;

-s Silent install driver.

Note:
- A dash(-) must precede the command line parameters.
- The parameters '-b' and '-u' must be specified before the '-s'
parameter.

Examples:
setup.exe -b -s Silent install driver and reboot the computer.
setup.exe -u -b -s Silent uninstall driver and reboot the computer.
setup.exe -s Silent install driver but not reboot the computer.
setup.exe -u -s Silent uninstall driver but not reboot the computer.
setup.ext -b -vsd -s Silent install Win9x/WinME VSD driver for Win9x/WinME System and reboot the computer.

Back to Top

Verifying Installation of the Driver

·         Window 9x VSD

1.      Open "Control Panel" from "Start Menu -> Settings".

2.      Open "System" in "Control Panel" and select the "Device Manager".

3.      Check the property of   "VIA Bus Master PCI IDE Controller (Ultra DMA)" if the driver" vatapi.vxd"  is existing or not.

4.      If it is then your installation is successful.

·         Windows 9x

1.      Open "Control Panel" from "Start Menu -> Settings".

2.      Open "System" in "Control Panel" and select the "Device Manager".

3.      Select "Hard disk controllers" and check if the "VIA Bus Master PCI IDE Controller (Ultra DMA)" controller is existing or not.

4.      If it is then your installation is successful.

·         Windows NT

1.      Open "Control Panel" from "Start Menu -> Settings"

2.      Select "SCSI Adapters" from "Control Panel".

3.      Check the "Devices" is "VIA bus master IDE drivers" or not.

4.      If it is then your installation is successful.

·         Windows 2000

1.      Open "Control Panel" from "Start Menu -> Settings".

2.      Open "System" in "Control Panel" and select the hardware page.

3.      Select "Device Manager"  and check the ATA/ATAPI Controller if the "VIA Bus Master PCI IDE Controller" controller is existing or not.

4.      If it is then check the name of each channel is.

Back to Top

Release History

Version 3.00.0

WIN2K(3.00.0)
  1. Pass HCT ACPI Stress Test
  2. Support IDETool user custom mode function

WINNT(3.00.0)

Support IDETool user custom mode function

WIN9X(3.00.0)

Support IDETool user custom mode function

WIN9XVSD(1.05)

no change

IDETOOL(1.0)

IDETool First Version 1.00

Version 3.01.0

WIN2K(3.01.0)
  1. Fix Hibernate Hang problem
  2. Fix Zip 100 Compatible problem 
  3. Fix Boot from 2'nd Channel fail problem
  4. Fix Ricoh DVD MP 9060a Shadow Effect
  5. Support IDETool for user to custom mode

WINNT(3.01.0)
  1. Fix Zip 100 Compatible problem 
  2. Support IDETool for user to custom mode

Win9X(3.01.0)
  1. Fix Zip 100 Compatible problem
  2. Fix Ricoh DVD MP 9060a Shadow Effect 
  3. Support IDETool for user to custom mode

Win9XVSD(1.05)
  1. Driver was Signed with WHQL Logo

WinMEVSD(1.05)
  1. the VSD for Win9x is as same as Win Millennium. There is no change.
  2. Driver was Signed with WHQL Logo

IDETOOL(1.02)
  1. Fix wrong ICON for Zip, MO.
  2. Fix custom mode for user defined 
  3. Fix not to mistake the cable type of IDE channel
  4. Simplify the function for user to enable/disable cache
  5. Localization problem for enable/disable auto starting

Setup
  1. Support the digital signature for Windows ME VSD Driver


 Version 3.01.1

WIN2K(3.01.1)
  1. Fix the problem after system finding 2'nd channel, the system will not recommend
    reboot system and device of 2'nd channel are disappear. After fixing, system will 
    ask user to reboot system.
  2. Fix the DMA feature is disabled problem.
  3. Fix only find Primary channel after install while the 2'nd channel is empty.
  4. Update INF File

WINNT(3.01.1)
  1. Update the patch program for zip 100.

Win9X(3.01.1)
  1. Fix the problem that drive will not supply the PIO mode device information to IDETool. 

Win9XVSD(1.05)
  1. There is no Change

WinMEVSD(1.05)
  1. There is no Change

IDETOOL(1.02.2)

Fix show wrong PIO mode nubmer in Mode select list for PIO Mode 0, 1, 2

Setup
  1. Fix silent install problem.
  2. Fix re-install fail problem with some south-bridge chips.
  3. Silent install make duplicate IDETool ICON in Program\IDETool menu

 

 

Back to Top